Industry
Fact-checked

At AboutMechanics, we're committed to delivering accurate, trustworthy information. Our expert-authored content is rigorously fact-checked and sourced from credible authorities. Discover how we uphold the highest standards in providing you with reliable knowledge.

Learn more...

What is a Knockout Plug?

Jeremy Laukkonen
Jeremy Laukkonen

A knockout plug is a removable piece of material that blocks an unused orifice. Each knockout plug is typically stamped from the same type of material as the tube or hole it blocks. The name is derived from the fact that if the orifice needs to be used, the plug can literally be knocked out. One common use for a knockout plug is the dishwasher connection found on many garbage disposals. Knockout plugs are also used in a variety of other applications, such as electrical boxes, dashboards, and control panels.

Most garbage disposals include an inlet tube that a dishwasher can be connected to. When the dishwasher drains down, it can push water into the disposal through this tube. Since not all homes have a dishwasher, disposals with this feature will typically have the opening blocked off by a knockout plug. This keeps the unit from leaking if nothing is connected to the dishwasher inlet. If there is a dishwasher, then the plug can easily be knocked out with a punch and hammer and removed prior to installation.

Knockout plugs are often used to connect dishwashers to garbage disposals.
Knockout plugs are often used to connect dishwashers to garbage disposals.

Another common use of knockout plugs is in electrical boxes. The box will typically have a number of possible ways to connect a conduit, each of which will be covered from the factory with a knockout plug. After the electrician has determine how many electrical conduits will connect to the box and in what configuration, he can use a hammer and punch to remove the appropriate plugs.

Control panels, dashboards, and other similar applications will often use knockout plugs. An example is an automotive dashboard, where the same unit may be used in vehicles that include different options. Rather than creating a unique dash for each application, a single dash with a variety of knockout plugs may be used. This can result in a vehicle that lacks certain options having plugs of some form on the dash where switches, gauges or lights would be located on other models.

A knockout plug typically can not be reinstalled after it has been removed, though there are often ways to simulate the functionality. The dishwasher inlet on a garbage disposal can typically be plugged with a rubber end cap. In order to prevent leakage, the cap may be fastened in place with a worm gear clamp. Electrical boxes often have replacement plugs as well, which will typically snap in place to block off any unused conduit holes and prevent electrocution.

Discussion Comments

SkyWhisperer

@allenJo - The knock out plug in your car dashboard opens up a whole world of options to you. For example, you can use it for hands free communication. Instead of using your hands to talk on the phone while you’re driving (a big no-no), you can install a hands free telephone system.

This system uses Bluetooth technology and will plug into the knock out plug on the dashboard. It’s the safest thing out there if you need to do a lot of talking while driving. You can talk directly into the system or use a microphone and earpiece if you want.

allenJo

Knock out plugs are very useful indeed, but they are not always easy to remove. It depends on what material they are made of and how long they’ve been there.

Most of the difficult ones – in my opinion – are made of metal and they require significant tapping to get them unloosed from their holes. Just be careful that you don’t bend the plugs when you do that, because you don’t want to mess up the hole.

In my opinion all of these plugs should be made from rubber because I think that material makes it easier to dislodge them from their holes.

Post your comments
Login:
Forgot password?
Register:
    • Knockout plugs are often used to connect dishwashers to garbage disposals.
      By: mitev
      Knockout plugs are often used to connect dishwashers to garbage disposals.