At AboutMechanics, we're committed to delivering accurate, trustworthy information. Our expert-authored content is rigorously fact-checked and sourced from credible authorities. Discover how we uphold the highest standards in providing you with reliable knowledge.
What Is a Wood Screw?
A wood screw is used to join two pieces of wood together. Made of steel, the wood screw typically has a head that is designed to be used with a regular slotted or Phillips-head screwdriver. A simple method of identifying a wood screw from a metal screw is to look at the screw's shank. A wood screw will have a blank shank underneath the head and above the threaded area, whereas a metal screw will typically have fine threads running from the point of the screw all the way up to the head with no blank or smooth area at all. The materials used to manufacture the screw can be plain steel, brass, or aluminum—galvanized steel or adhesive-coated steel are other options.
The threads of this type of screw are intended to bite into the walls of a pre-drilled hole. The screw is not typically used to drill its own hole; however, some specialty-type screws are so intended. When attempting to force a wood screw into position without pre-drilling a pilot hole, the wood will usually crack, and the screw will typically not hold as well as a screw driven into a pilot hole. By using a pilot hole, the threads in the screw are able to bite without being impeded by wood chips in the hole.
One type of screw that performs flawlessly without a pilot hole is a drywall screw. Many times, the drywall screw will be mistaken for a wood screw, though they are not the same. The drywall screw is a very coarse threaded screw that is designed to be driven into wood without a pilot hole. This type of screw is not designed for structural strength, nor is it made to securely fasten two pieces of wood together. The drywall screw is more like a staple in that it fastens a covering onto a wood wall. By having threads running the full length of the screw, it cannot sufficiently tighten two pieces of wood together.
The blank shank of the wood screw allows the screw to spin freely inside of the outermost piece of wood and draw the inner piece tight against it by having the threaded end grip the wood and pull. The fully threaded drywall type screw has threads which will tighten inside of the outer piece of wood and will not allow the screw to spin freely while the end threads grip and pull the wood. This results in a screw that is very tight—however, the wood can remain apart.
AS FEATURED ON:
AS FEATURED ON:
-
![A example of a common wood screw is the lag screw, which has coarse threading and a hexagonal head.]()
By: junejA example of a common wood screw is the lag screw, which has coarse threading and a hexagonal head. -
![A wood screw generally has a head that can be used with a standard slotted screwdriver.]()
By: micahbowerbankA wood screw generally has a head that can be used with a standard slotted screwdriver.
Discussion Comments
@Feryll - If you decide to use the wood screws then be aware that there are a lot of different wood screw sizes. Before you start to drill the holes for the screws, be sure to match the hole size with the screw size. If you drill too large of a hole then the screws will not fasten and they will pop right out of place and leave the threshold loose.
@Feryll - I have two thresholds that I added to one of my sheds/barns. The building has three different rooms with two inside doors and the entrance door. At one of the inside doors I nailed the threshold in place, and I used wood screws on the other inside door threshold.
They both look fine, and they are both firmly in place. The only problem I have with the nails is they pop out from time to time. Actually, they just work their way out of the holes a little, and I have to tap them back down with a hammer. This is not a big problem, and it's not like I am having to hammer the nails every week or even every month. Still, I have not had to touch the threshold with the screws to make any repairs, so I would recommend the flat head wood screws in place of the nails.
I recently put down a new kitchen floor. The floor is laminate tile and it butts up against the flooring in our mud room, which was at one time a back porch, before it was closed in and remodeled. Anyway, there was no threshold between the old linoleum kitchen floor and the mud room floor. There were two distinct patterns on the floors, but no one saw a need for any type of dividing line.
I am wondering is there an advantage to using flat head wood screws on the new threshold instead of nails? I think I can make the nails virtually invisible by driving them in deeply and then putting a finish and stain on the threshold.
Post your comments